A számítógép véletlenszerűen újraindul

Fórum: 

Sziasztok! A problémám az lenne, hogy a számítógépem véletlenszerű időközönként újraindul. Közvetlen újraindulás után a syslog ezt dobja vissza:

[    0.000000] microcode: microcode updated early to revision 0xec, date = 2021-04-28
[    0.000000] Linux version 5.16.0-debian-amd64 (gcc-11 (Debian 11.2.0-19) 11.2.0, GNU ld (GNU Binutils for Debian) 2.38) #1 SMP PREEMPT Debian 5.16.18-1debian1 (2022-04-01)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0-debian-amd64 root=UUID=*** ro quiet splash
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000060000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000088465fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000088466000-0x0000000089caafff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000089cab000-0x0000000089d28fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000089d29000-0x000000008a1adfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008a1ae000-0x000000008ab4afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008ab4b000-0x000000008ac0dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008ac0e000-0x000000008ac0efff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ac0f000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI 2.0=0x89cc5000 ACPI=0x89cc5000 TPMFinalLog=0x8a138000 SMBIOS=0x8a9a1000 SMBIOS 3.0=0x8a9a0000 MEMATTR=0x843cc018 ESRT=0x85f0a618 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.2.1 present.
[    0.000000] DMI: System manufacturer System Product Name/***, ***
[    0.000000] tsc: Detected * MHz processor
[    0.000533] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000536] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000542] last_pfn = 0x86e000 max_arch_pfn = 0x400000000
[    0.000628] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001207] last_pfn = 0x8ac0f max_arch_pfn = 0x400000000
[    0.007895] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f]
[    0.007905] esrt: Reserving ESRT space from 0x0000000085f0a618 to 0x0000000085f0a650.
[    0.007910] e820: update [mem 0x85f0a000-0x85f0afff] usable ==> reserved
[    0.007922] Using GB pages for direct mapping
[    0.008509] RAMDISK: [mem 0x309ab000-0x344ccfff]
[    0.008515] ACPI: Early table checksum verification disabled
[    0.008517] ACPI: RSDP 0x0000000089CC5000 000024 (v02 ALASKA)
[    0.008520] ACPI: XSDT 0x0000000089CC50A8 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008525] ACPI: FACP 0x0000000089D05418 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.008529] ACPI: DSDT 0x0000000089CC5200 040218 (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.008532] ACPI: FACS 0x000000008A1AD080 000040
[    0.008534] ACPI: APIC 0x0000000089D05530 0000BC (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.008537] ACPI: FPDT 0x0000000089D055F0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008540] ACPI: FIDT 0x0000000089D05638 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008542] ACPI: MCFG 0x0000000089D056D8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.008545] ACPI: WSMT 0x0000000089D122D8 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008547] ACPI: SSDT 0x0000000089D05770 001B1C (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.008550] ACPI: SSDT 0x0000000089D07290 003099 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.008553] ACPI: HPET 0x0000000089D0A330 000038 (v01 ALASKA A M I    00000002      01000013)
[    0.008555] ACPI: SSDT 0x0000000089D0A368 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
[    0.008558] ACPI: SSDT 0x0000000089D0B318 002FCD (v02 INTEL  xh_cfsd4 00000000 INTL 20160527)
[    0.008561] ACPI: UEFI 0x0000000089D0E2E8 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.008564] ACPI: LPIT 0x0000000089D0E330 000094 (v01 ALASKA A M I    00000002      01000013)
[    0.008566] ACPI: SSDT 0x0000000089D0E3C8 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527)
[    0.008569] ACPI: SSDT 0x0000000089D10BA8 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
[    0.008571] ACPI: DBGP 0x0000000089D12090 000034 (v01 ALASKA A M I    00000002      01000013)
[    0.008574] ACPI: DBG2 0x0000000089D120C8 000054 (v00 ALASKA A M I    00000002      01000013)
[    0.008576] ACPI: SSDT 0x0000000089D12120 000144 (v02 Intel  ADebTabl 00001000 INTL 20160527)
[    0.008579] ACPI: BGRT 0x0000000089D12268 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008581] ACPI: TPM2 0x0000000089D122A0 000034 (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.008584] ACPI: Reserving FACP table memory at [mem 0x89d05418-0x89d0552b]
[    0.008585] ACPI: Reserving DSDT table memory at [mem 0x89cc5200-0x89d05417]
[    0.008586] ACPI: Reserving FACS table memory at [mem 0x8a1ad080-0x8a1ad0bf]
[    0.008587] ACPI: Reserving APIC table memory at [mem 0x89d05530-0x89d055eb]
[    0.008588] ACPI: Reserving FPDT table memory at [mem 0x89d055f0-0x89d05633]
[    0.008589] ACPI: Reserving FIDT table memory at [mem 0x89d05638-0x89d056d3]
[    0.008590] ACPI: Reserving MCFG table memory at [mem 0x89d056d8-0x89d05713]
[    0.008591] ACPI: Reserving WSMT table memory at [mem 0x89d122d8-0x89d122ff]
[    0.008591] ACPI: Reserving SSDT table memory at [mem 0x89d05770-0x89d0728b]
[    0.008592] ACPI: Reserving SSDT table memory at [mem 0x89d07290-0x89d0a328]
[    0.008593] ACPI: Reserving HPET table memory at [mem 0x89d0a330-0x89d0a367]
[    0.008594] ACPI: Reserving SSDT table memory at [mem 0x89d0a368-0x89d0b315]
[    0.008595] ACPI: Reserving SSDT table memory at [mem 0x89d0b318-0x89d0e2e4]
[    0.008596] ACPI: Reserving UEFI table memory at [mem 0x89d0e2e8-0x89d0e329]
[    0.008597] ACPI: Reserving LPIT table memory at [mem 0x89d0e330-0x89d0e3c3]
[    0.008598] ACPI: Reserving SSDT table memory at [mem 0x89d0e3c8-0x89d10ba5]
[    0.008599] ACPI: Reserving SSDT table memory at [mem 0x89d10ba8-0x89d12089]
[    0.008600] ACPI: Reserving DBGP table memory at [mem 0x89d12090-0x89d120c3]
[    0.008601] ACPI: Reserving DBG2 table memory at [mem 0x89d120c8-0x89d1211b]
[    0.008602] ACPI: Reserving SSDT table memory at [mem 0x89d12120-0x89d12263]
[    0.008603] ACPI: Reserving BGRT table memory at [mem 0x89d12268-0x89d1229f]
[    0.008604] ACPI: Reserving TPM2 table memory at [mem 0x89d122a0-0x89d122d3]
[    0.008758] No NUMA configuration found
[    0.008759] Faking a node at [mem 0x0000000000000000-0x000000086dffffff]
[    0.008768] NODE_DATA(0) allocated [mem 0x86dfd5000-0x86dffffff]
[    0.009098] Zone ranges:
[    0.009099]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009101]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.009102]   Normal   [mem 0x0000000100000000-0x000000086dffffff]
[    0.009104]   Device   empty
[    0.009105] Movable zone start for each node
[    0.009107] Early memory node ranges
[    0.009107]   node   0: [mem 0x0000000000001000-0x000000000005efff]
[    0.009109]   node   0: [mem 0x0000000000060000-0x000000000009ffff]
[    0.009110]   node   0: [mem 0x0000000000100000-0x0000000088465fff]
[    0.009111]   node   0: [mem 0x000000008ac0e000-0x000000008ac0efff]
[    0.009112]   node   0: [mem 0x0000000100000000-0x000000086dffffff]
[    0.009115] Initmem setup node 0 [mem 0x0000000000001000-0x000000086dffffff]
[    0.009119] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009121] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009151] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.013380] On node 0, zone DMA32: 10152 pages in unavailable ranges
[    0.013880] On node 0, zone Normal: 21489 pages in unavailable ranges
[    0.013963] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.013976] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
[    0.014257] ACPI: PM-Timer IO Port: 0x1808
[    0.014262] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.014264] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.014265] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.014265] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.014266] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.014267] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.014267] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.014268] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.014301] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.014303] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.014305] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.014308] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.014309] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.014314] e820: update [mem 0x8368f000-0x836d4fff] usable ==> reserved
[    0.014322] TSC deadline timer available
[    0.014323] smpboot: Allowing * CPUs, * hotplug CPUs
[    0.014341] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.014343] PM: hibernation: Registered nosave memory: [mem 0x0005f000-0x0005ffff]
[    0.014345] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.014347] PM: hibernation: Registered nosave memory: [mem 0x8368f000-0x836d4fff]
[    0.014348] PM: hibernation: Registered nosave memory: [mem 0x85f0a000-0x85f0afff]
[    0.014350] PM: hibernation: Registered nosave memory: [mem 0x88466000-0x89caafff]
[    0.014351] PM: hibernation: Registered nosave memory: [mem 0x89cab000-0x89d28fff]
[    0.014351] PM: hibernation: Registered nosave memory: [mem 0x89d29000-0x8a1adfff]
[    0.014352] PM: hibernation: Registered nosave memory: [mem 0x8a1ae000-0x8ab4afff]
[    0.014353] PM: hibernation: Registered nosave memory: [mem 0x8ab4b000-0x8ac0dfff]
[    0.014354] PM: hibernation: Registered nosave memory: [mem 0x8ac0f000-0x8fffffff]
[    0.014355] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.014356] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.014357] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.014357] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.014358] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.014359] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.014359] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.014360] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.014361] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[    0.014361] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.014362] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.014363] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.014364] [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.014366] Booting paravirtualized kernel on bare hardware
[    0.014367] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.018478] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.018641] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[    0.018647] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[    0.018650] pcpu-alloc: *
[    0.018677] Fallback order for Node 0: 0 
[    0.018680] Built 1 zonelists, mobility grouping on.  Total pages: 8218069
[    0.018681] Policy zone: Normal
[    0.018682] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0-debian-amd64 root=UUID=*** ro quiet splash
[    0.018726] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.16.0-debian-amd64", will be passed to user space.
[    0.020121] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.020823] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.020887] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.043993] Memory: *K available (12295K kernel code, 2737K rwdata, 8440K rodata, 2484K init, 5236K bss, 813400K reserved, 0K cma-reserved)
[    0.043999] random: get_random_u64 called from __kmem_cache_create+0x2a/0x530 with crng_init=0
[    0.044137] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=*, Nodes=1
[    0.044150] ftrace: allocating 38345 entries in 150 pages
[    0.056134] ftrace: allocated 150 pages with 4 groups
[    0.056689] Dynamic Preempt: voluntary
[    0.056718] rcu: Preemptible hierarchical RCU implementation.
[    0.056719] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=*.
[    0.056721]  Trampoline variant of Tasks RCU enabled.
[    0.056721]  Rude variant of Tasks RCU enabled.
[    0.056722]  Tracing variant of Tasks RCU enabled.
[    0.056722] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.056723] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=*
[    0.060262] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.060808] random: crng done (trusting CPU's manufacturer)
[    0.060832] Console: colour dummy device 80x25
[    0.060845] printk: console [tty0] enabled
[    0.060860] ACPI: Core revision 20210930
[    0.061182] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.061275] APIC: Switch to symmetric I/O mode setup
[    0.062657] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.067854] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.085241] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3e459bf4c, max_idle_ns: 440795289890 ns
[    0.085246] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.00 BogoMIPS (lpj=12000000)
[    0.085248] pid_max: default: 32768 minimum: 301
[    0.089063] LSM: Security Framework initializing
[    0.089071] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.089089] AppArmor: AppArmor initialized
[    0.089091] TOMOYO Linux initialized
[    0.089141] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.089181] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.089399] CPU0: Thermal monitoring enabled (TM1)
[    0.089461] process: using mwait in idle threads
[    0.089463] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.089464] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.089469] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.089471] Spectre V2 : Mitigation: Enhanced IBRS
[    0.089471] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.089472] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.089474] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.089474] TAA: Mitigation: TSX disabled
[    0.089475] SRBDS: Mitigation: TSX disabled
[    0.093424] Freeing SMP alternatives memory: *K
[    0.093689] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1570
[    0.093706] smpboot: CPU0: *** (family: 0x6, model: 0x9e, stepping: 0xd)
[    0.093818] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.093832] ... version:                4
[    0.093833] ... bit width:              48
[    0.093833] ... generic registers:      *
[    0.093834] ... value mask:             0000ffffffffffff
[    0.093835] ... max period:             00007fffffffffff
[    0.093835] ... fixed-purpose events:   3
[    0.093836] ... event mask:             00000007000000ff
[    0.093921] rcu: Hierarchical SRCU implementation.
[    0.094462] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.094529] smp: Bringing up secondary CPUs ...
[    0.094592] x86: Booting SMP configuration:
[    0.094593] .... node  #0, CPUs:      ***
[    0.107261] smp: Brought up 1 node, * CPUs
[    0.107261] smpboot: Max logical packages: 1
[    0.107261] smpboot: Total of * processors activated (* BogoMIPS)
[    0.141511] node 0 deferred pages initialised in 32ms
[    0.142035] devtmpfs: initialized
[    0.142035] x86/mm: Memory block size: *MB
[    0.142901] ACPI: PM: Registering ACPI NVS region [mem 0x89d29000-0x8a1adfff] (4739072 bytes)
[    0.142901] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.142901] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.142901] pinctrl core: initialized pinctrl subsystem
[    0.142901] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.142901] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.142901] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.145330] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.145337] audit: initializing netlink subsys (disabled)
[    0.145343] audit: type=2000 audit(1652393460.084:1): state=initialized audit_enabled=0 res=1
[    0.145343] thermal_sys: Registered thermal governor 'fair_share'
[    0.145343] thermal_sys: Registered thermal governor 'bang_bang'
[    0.145343] thermal_sys: Registered thermal governor 'step_wise'
[    0.145343] thermal_sys: Registered thermal governor 'user_space'
[    0.145343] thermal_sys: Registered thermal governor 'power_allocator'
[    0.145343] cpuidle: using governor ladder
[    0.145343] cpuidle: using governor menu
[    0.145347] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.145347] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.145347] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.145347] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.145347] PCI: Using configuration type 1 for base access
[    0.145752] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.145865] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.145870] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.145870] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.145870] ACPI: Added _OSI(Module Device)
[    0.145870] ACPI: Added _OSI(Processor Device)
[    0.145870] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.145870] ACPI: Added _OSI(Processor Aggregator Device)
[    0.145870] ACPI: Added _OSI(Linux-Dell-Video)
[    0.145870] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.145870] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.199173] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.205246] ACPI: Dynamic OEM Table Load:
[    0.205246] ACPI: SSDT 0xFFFF980A59577900 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.205513] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.206719] ACPI: Dynamic OEM Table Load:
[    0.206723] ACPI: SSDT 0xFFFF980A59599000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.207650] ACPI: Dynamic OEM Table Load:
[    0.207655] ACPI: SSDT 0xFFFF980A595A7800 000605 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.208638] ACPI: Dynamic OEM Table Load:
[    0.208641] ACPI: SSDT 0xFFFF980A595EC800 000133 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.209479] ACPI: Dynamic OEM Table Load:
[    0.209484] ACPI: SSDT 0xFFFF980A595A3000 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.210533] ACPI: Dynamic OEM Table Load:
[    0.210538] ACPI: SSDT 0xFFFF980A595A4000 0005FC (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.211509] ACPI: Dynamic OEM Table Load:
[    0.211512] ACPI: SSDT 0xFFFF980A59599400 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.212467] ACPI: Dynamic OEM Table Load:
[    0.212472] ACPI: SSDT 0xFFFF980A5958E000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.213816] ACPI: Dynamic OEM Table Load:
[    0.213820] ACPI: SSDT 0xFFFF980A5959D000 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.218028] ACPI: Interpreter enabled
[    0.218065] ACPI: PM: (supports S0 S3 S4 S5)
[    0.218066] ACPI: Using IOAPIC for interrupt routing
[    0.218098] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.218982] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.229674] ACPI: PM: Power Resource [USBC]
[    0.232190] ACPI: PM: Power Resource [V0PR]
[    0.232530] ACPI: PM: Power Resource [V1PR]
[    0.232860] ACPI: PM: Power Resource [V2PR]
[    0.237755] ACPI: PM: Power Resource [WRST]
[    0.240002] ACPI: PM: Power Resource [FN00]
[    0.240057] ACPI: PM: Power Resource [FN01]
[    0.240109] ACPI: PM: Power Resource [FN02]
[    0.240162] ACPI: PM: Power Resource [FN03]
[    0.240215] ACPI: PM: Power Resource [FN04]
[    0.240757] ACPI: PM: Power Resource [PIN]
[    0.241131] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.241136] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.241213] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.241351] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.241353] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.242138] PCI host bridge to bus 0000:00
[    0.242140] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.242142] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.242143] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.242144] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.242146] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.242147] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.242219] pci 0000:00:00.0: [8086:3e30] type 00 class 0x060000
[    0.242284] pci 0000:00:02.0: [8086:3e98] type 00 class 0x030000
[    0.242293] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[    0.242298] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.242303] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.242317] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.242319] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.242517] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    0.242531] pci 0000:00:14.0: reg 0x10: [mem 0xa1120000-0xa112ffff 64bit]
[    0.242584] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.243849] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    0.243865] pci 0000:00:14.2: reg 0x10: [mem 0xa1136000-0xa1137fff 64bit]
[    0.243875] pci 0000:00:14.2: reg 0x18: [mem 0xa113c000-0xa113cfff 64bit]
[    0.243981] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    0.243999] pci 0000:00:16.0: reg 0x10: [mem 0xa113b000-0xa113bfff 64bit]
[    0.244069] pci 0000:00:16.0: PME# supported from D3hot
[    0.244441] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[    0.244453] pci 0000:00:17.0: reg 0x10: [mem 0xa1134000-0xa1135fff]
[    0.244459] pci 0000:00:17.0: reg 0x14: [mem 0xa113a000-0xa113a0ff]
[    0.244466] pci 0000:00:17.0: reg 0x18: [io  0x3090-0x3097]
[    0.244472] pci 0000:00:17.0: reg 0x1c: [io  0x3080-0x3083]
[    0.244478] pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
[    0.244484] pci 0000:00:17.0: reg 0x24: [mem 0xa1139000-0xa11397ff]
[    0.244518] pci 0000:00:17.0: PME# supported from D3hot
[    0.244764] pci 0000:00:1b.0: [8086:a32c] type 01 class 0x060400
[    0.244838] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.245316] pci 0000:00:1c.0: [8086:a33c] type 01 class 0x060400
[    0.245390] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.245850] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[    0.245923] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.246390] pci 0000:00:1f.0: [8086:a308] type 00 class 0x060100
[    0.246726] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[    0.246755] pci 0000:00:1f.3: reg 0x10: [mem 0xa1130000-0xa1133fff 64bit]
[    0.246792] pci 0000:00:1f.3: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
[    0.246864] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.249338] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    0.249361] pci 0000:00:1f.4: reg 0x10: [mem 0xa1138000-0xa11380ff 64bit]
[    0.249388] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.249592] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    0.249606] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.249706] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
[    0.249732] pci 0000:00:1f.6: reg 0x10: [mem 0xa1100000-0xa111ffff]
[    0.249873] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.250009] acpiphp: Slot [1] registered
[    0.250017] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    0.250087] acpiphp: Slot [1-1] registered
[    0.250097] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.250165] acpiphp: Slot [1-2] registered
[    0.250173] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.251324] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.251395] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.251463] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.251531] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.251598] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.251665] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.251733] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.251800] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.257251] iommu: Default domain type: Translated 
[    0.257251] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.257258] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.257258] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.257258] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.257258] vgaarb: loaded
[    0.257304] EDAC MC: Ver: 3.0.0
[    0.257368] Registered efivars operations
[    0.257368] NetLabel: Initializing
[    0.257368] NetLabel:  domain hash size = 128
[    0.257368] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.257368] NetLabel:  unlabeled traffic allowed by default
[    0.257368] PCI: Using ACPI for IRQ routing
[    0.299861] PCI: pci_cache_line_size set to 64 bytes
[    0.299925] e820: reserve RAM buffer [mem 0x0005f000-0x0005ffff]
[    0.299927] e820: reserve RAM buffer [mem 0x8368f000-0x83ffffff]
[    0.299928] e820: reserve RAM buffer [mem 0x85f0a000-0x87ffffff]
[    0.299929] e820: reserve RAM buffer [mem 0x88466000-0x8bffffff]
[    0.299930] e820: reserve RAM buffer [mem 0x8ac0f000-0x8bffffff]
[    0.299931] e820: reserve RAM buffer [mem 0x86e000000-0x86fffffff]
[    0.300688] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.300694] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.302274] clocksource: Switched to clocksource tsc-early
[    0.306549] VFS: Disk quotas dquot_6.6.0
[    0.306559] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.306645] AppArmor: AppArmor Filesystem Enabled
[    0.306656] pnp: PnP ACPI init
[    0.306720] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.306877] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.307287] pnp 00:02: [dma 0 disabled]
[    0.307404] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.307498] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.307633] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.307635] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.307637] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.307638] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.307640] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.307641] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.307643] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.307644] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.307834] system 00:06: [io  0x1800-0x18fe] could not be reserved
[    0.307837] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.307838] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.307839] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.307841] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.307842] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.307844] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.308096] system 00:07: [io  0x2000-0x20fe] has been reserved
[    0.309076] system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved
[    0.309078] system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[    0.309079] system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[    0.309081] system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved
[    0.309830] pnp: PnP ACPI: found 9 devices
[    0.315267] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.315311] NET: Registered PF_INET protocol family
[    0.315434] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.317054] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.317189] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.317426] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.317485] TCP: Hash tables configured (established 262144 bind 65536)
[    0.317569] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.317659] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.317731] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.317806] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.317810] NET: Registered PF_XDP protocol family
[    0.317813] pci 0000:00:1b.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.317817] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.317819] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.317821] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.317822] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.317824] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.317830] pci 0000:00:1b.0: BAR 14: assigned [mem 0xa1200000-0xa13fffff]
[    0.317834] pci 0000:00:1b.0: BAR 15: assigned [mem 0xa1400000-0xa15fffff 64bit pref]
[    0.317836] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa1600000-0xa17fffff]
[    0.317838] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa1800000-0xa19fffff 64bit pref]
[    0.317840] pci 0000:00:1b.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.317842] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.317845] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    0.317852] pci 0000:00:1b.0:   bridge window [io  0x4000-0x4fff]
[    0.317856] pci 0000:00:1b.0:   bridge window [mem 0xa1200000-0xa13fffff]
[    0.317859] pci 0000:00:1b.0:   bridge window [mem 0xa1400000-0xa15fffff 64bit pref]
[    0.317863] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.317866] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.317869] pci 0000:00:1c.0:   bridge window [mem 0xa1600000-0xa17fffff]
[    0.317872] pci 0000:00:1c.0:   bridge window [mem 0xa1800000-0xa19fffff 64bit pref]
[    0.317876] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.317886] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.317888] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.317889] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.317890] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.317891] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    0.317892] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.317893] pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa13fffff]
[    0.317894] pci_bus 0000:01: resource 2 [mem 0xa1400000-0xa15fffff 64bit pref]
[    0.317896] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.317897] pci_bus 0000:02: resource 1 [mem 0xa1600000-0xa17fffff]
[    0.317898] pci_bus 0000:02: resource 2 [mem 0xa1800000-0xa19fffff 64bit pref]
[    0.318752] PCI: CLS 64 bytes, default 64
[    0.318758] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.318759] software IO TLB: mapped [mem 0x000000007f68f000-0x000000008368f000] (64MB)
[    0.318798] Trying to unpack rootfs image as initramfs...
[    0.318808] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.319056] Initialise system trusted keyrings
[    0.319063] Key type blacklist registered
[    0.319091] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    0.320034] zbud: loaded
[    0.320193] integrity: Platform Keyring initialized
[    0.320195] Key type asymmetric registered
[    0.320196] Asymmetric key parser 'x509' registered
[    0.320214] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.320248] io scheduler mq-deadline registered
[    0.320932] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.321685] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1570
[    0.322748] thermal LNXTHERM:00: registered as thermal_zone0
[    0.322750] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.322880] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.323324] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.324979] Linux agpgart interface v0.103
[    0.330415] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.331058] i8042: PNP: No PS/2 controller found.
[    0.331172] mousedev: PS/2 mouse device common for all mice
[    0.331204] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.331993] rtc_cmos rtc_cmos: registered as rtc0
[    0.332161] rtc_cmos rtc_cmos: setting system clock to 2022-05-12T22:11:00 UTC (1652393460)
[    0.332173] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.332616] intel_pstate: Intel P-state driver initializing
[    0.333114] intel_pstate: Disabling energy efficiency optimization
[    0.333114] intel_pstate: HWP enabled
[    0.333241] ledtrig-cpu: registered to indicate activity on CPUs
[    0.333437] efifb: probing for efifb
[    0.333443] efifb: framebuffer at 0x90000000, using 3072k, total 3072k
[    0.333444] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.333445] efifb: scrolling: redraw
[    0.333445] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.333504] Console: switching to colour frame buffer device 128x48
[    0.334498] fb0: EFI VGA frame buffer device
[    0.334622] NET: Registered PF_INET6 protocol family
[    0.563279] Freeing initrd memory: 60552K
[    0.567963] Segment Routing with IPv6
[    0.567971] In-situ OAM (IOAM) with IPv6
[    0.567986] mip6: Mobile IPv6
[    0.567987] NET: Registered PF_PACKET protocol family
[    0.568100] mpls_gso: MPLS GSO support
[    0.568877] microcode: sig=0x906ed, pf=0x2, revision=0xec
[    0.569066] microcode: Microcode Update Driver: v2.2.
[    0.569070] IPI shorthand broadcast: enabled
[    0.569076] sched_clock: Marking stable (568216348, 608531)->(574375340, -5550461)
[    0.569240] registered taskstats version 1
[    0.569241] Loading compiled-in X.509 certificates
[    0.602868] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    0.602878] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    0.603326] zswap: loaded using pool lzo/zbud
[    0.604544] Key type ._fscrypt registered
[    0.604545] Key type .fscrypt registered
[    0.604546] Key type fscrypt-provisioning registered
[    0.606743] Key type encrypted registered
[    0.606745] AppArmor: AppArmor sha1 policy hashing enabled
[    0.607909] integrity: Loading X.509 certificate: UEFI:db
[    0.608015] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[    0.608016] integrity: Loading X.509 certificate: UEFI:db
[    0.608115] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[    0.608115] integrity: Loading X.509 certificate: UEFI:db
[    0.608125] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.608126] integrity: Loading X.509 certificate: UEFI:db
[    0.608136] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.608136] integrity: Loading X.509 certificate: UEFI:db
[    0.608236] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.609090] ima: Allocated hash algorithm: sha256
[    0.626288] ima: No architecture policies found
[    0.626295] evm: Initialising EVM extended attributes:
[    0.626296] evm: security.selinux
[    0.626296] evm: security.SMACK64 (disabled)
[    0.626297] evm: security.SMACK64EXEC (disabled)
[    0.626297] evm: security.SMACK64TRANSMUTE (disabled)
[    0.626298] evm: security.SMACK64MMAP (disabled)
[    0.626298] evm: security.apparmor
[    0.626298] evm: security.ima
[    0.626299] evm: security.capability
[    0.626299] evm: HMAC attrs: 0x1
[    0.691578] Freeing unused decrypted memory: 2036K
[    0.691969] Freeing unused kernel image (initmem) memory: 2484K
[    0.705331] Write protecting the kernel read-only data: 24576k
[    0.706127] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    0.706579] Freeing unused kernel image (rodata/data gap) memory: 1800K
[    0.716337] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.716339] Run /init as init process
[    0.716340]   with arguments:
[    0.716341]     /init
[    0.716341]     splash
[    0.716342]   with environment:
[    0.716342]     HOME=/
[    0.716343]     TERM=linux
[    0.716343]     BOOT_IMAGE=/boot/vmlinuz-5.16.0-debian-amd64
[    0.779723] button: module verification failed: signature and/or required key missing - tainting kernel
[    0.788320] pps_core: LinuxPPS API ver. 1 registered
[    0.788322] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.788582] ACPI: bus type drm_connector registered
[    0.788582] PTP clock support registered
[    0.789168] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.789195] ACPI: button: Sleep Button [SLPB]
[    0.789221] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.789251] ACPI: button: Power Button [PWRB]
[    0.789279] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.789814] ACPI: button: Power Button [PWRF]
[    0.789868] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    0.789928] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    0.790110] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    0.790173] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.790354] ACPI: bus type USB registered
[    0.790366] usbcore: registered new interface driver usbfs
[    0.790372] usbcore: registered new interface driver hub
[    0.790378] usbcore: registered new device driver usb
[    0.790588] e1000e: Intel(R) PRO/1000 Network Driver
[    0.790589] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.790732] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.791307] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    0.791554] SCSI subsystem initialized
[    0.791734] i2c i2c-0: Successfully instantiated SPD at 0x50
[    0.792692] cryptd: max_cpu_qlen set to 1000
[    0.793492] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.793500] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.793845] AVX2 version of gcm_enc/dec engaged.
[    0.793870] AES CTR mode by8 optimization enabled
[    0.793893] libata version 3.00 loaded.
[    0.794568] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    0.794724] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[    0.794727] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.794728] usb usb1: Product: xHCI Host Controller
[    0.794729] usb usb1: Manufacturer: Linux 5.16.0-debian-amd64 xhci-hcd
[    0.794730] usb usb1: SerialNumber: 0000:00:14.0
[    0.794806] ahci 0000:00:17.0: version 3.0
[    0.794861] hub 1-0:1.0: USB hub found
[    0.794881] hub 1-0:1.0: 16 ports detected
[    0.796040] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.796043] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.796046] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.796082] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
[    0.796085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.796086] usb usb2: Product: xHCI Host Controller
[    0.796086] usb usb2: Manufacturer: Linux 5.16.0-debian-amd64 xhci-hcd
[    0.796087] usb usb2: SerialNumber: 0000:00:14.0
[    0.796168] hub 2-0:1.0: USB hub found
[    0.796220] hub 2-0:1.0: 6 ports detected
[    0.805182] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.805185] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
[    0.816169] checking generic (90000000 300000) vs hw (a0000000 1000000)
[    0.816170] checking generic (90000000 300000) vs hw (90000000 10000000)
[    0.816171] fb0: switching to i915 from EFI VGA
[    0.816211] Console: switching to colour dummy device 80x25
[    0.816228] i915 0000:00:02.0: vgaarb: deactivate vga console
[    0.817400] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.817423] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[    0.817668] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    0.877487] scsi host0: ahci
[    0.877564] scsi host1: ahci
[    0.877664] scsi host2: ahci
[    0.877720] scsi host3: ahci
[    0.877768] scsi host4: ahci
[    0.877816] scsi host5: ahci
[    0.877841] ata1: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139100 irq 125
[    0.877843] ata2: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139180 irq 125
[    0.877844] ata3: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139200 irq 125
[    0.877845] ata4: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139280 irq 125
[    0.877846] ata5: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139300 irq 125
[    0.877848] ata6: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139380 irq 125
[    0.992761] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    1.060580] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 0c:9d:92:85:fb:1f
[    1.060582] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    1.060653] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[    1.061245] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.088759] i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP
[    1.088963] i915 0000:00:02.0: [drm] [ENCODER:104:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
[    1.121224] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    1.122490] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.122641] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.146533] fbcon: i915drmfb (fb0) is primary device
[    1.153629] Console: switching to colour frame buffer device 160x64
[    1.177312] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    1.192985] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.193112] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.193155] ata3: SATA link down (SStatus 4 SControl 300)
[    1.193397] ata1.00: ATA-11: ***, ***, max UDMA/133
[    1.193541] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.194150] ata6.00: ATAPI: ***, LM01, max UDMA/133
[    1.194175] ata1.00: configured for UDMA/133
[    1.194552] scsi 0:0:0:0: Direct-Access     ATA      *** B1D1 PQ: 0 ANSI: 5
[    1.195884] ata6.00: configured for UDMA/133
[    1.196666] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.196763] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.196919] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.197559] ata5.00: ***, ***, max UDMA/133
[    1.197914] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.198894] ata5.00: configured for UDMA/133
[    1.198928] ata4.00: supports DRM functions and may not be fully accessible
[    1.198937] ata4.00: ***, RVT04B6Q, max UDMA/133
[    1.199799] ata4.00: disabling queued TRIM support
[    1.199808] ata4.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.203173] ata4.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    1.203791] ata4.00: supports DRM functions and may not be fully accessible
[    1.204779] ata4.00: disabling queued TRIM support
[    1.208823] ata4.00: configured for UDMA/133
[    1.215360] usb 1-5: New USB device found, idVendor=195d, idProduct=1017, bcdDevice= 0.24
[    1.215372] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.215378] usb 1-5: Product: ***
[    1.215382] usb 1-5: Manufacturer: ***
[    1.222743] hid: raw HID events driver (C) Jiri Kosina
[    1.226198] ata2.00: HPA detected: current 1953523055, native 1953525168
[    1.226212] ata2.00: ATA-10: ***, SDM1, max UDMA/133
[    1.329385] ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.341340] tsc: Refined TSC clocksource calibration: 2999.999 MHz
[    1.341354] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e44b2357, max_idle_ns: 440795324996 ns
[    1.341454] clocksource: Switched to clocksource tsc
[    1.345338] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    1.378933] ata2.00: configured for UDMA/133
[    1.379284] scsi 1:0:0:0: Direct-Access     ATA      *** SDM1 PQ: 0 ANSI: 5
[    1.380589] scsi 3:0:0:0: Direct-Access     ATA      *** 4B6Q PQ: 0 ANSI: 5
[    1.381535] scsi 4:0:0:0: Direct-Access     ATA      ***  A8J0 PQ: 0 ANSI: 5
[    1.383057] scsi 5:0:0:0: CD-ROM            ***  LM01 PQ: 0 ANSI: 5
[    1.416446] usbcore: registered new interface driver usbhid
[    1.416453] usbhid: USB HID core driver
[    1.420463] input: *** as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:195D:1017.0001/input/input4
[    1.420550] ata4.00: Enabling discard_zeroes_data
[    1.420683] sd 1:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.420684] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.420693] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.420711] sd 0:0:0:0: [sda] Write Protect is off
[    1.420714] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.420719] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.420723] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[    1.420725] hid-generic 0003:195D:1017.0001: input,hidraw0: USB HID v1.11 Mouse [***] on usb-0000:00:14.0-5/input0
[    1.420730] sd 1:0:0:0: [sdb] Write Protect is off
[    1.420738] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.420738] sd 3:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.420764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.420765] sd 3:0:0:0: [sdc] Write Protect is off
[    1.420773] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.420791] sd 4:0:0:0: [sdd] Write Protect is off
[    1.420800] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.420811] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.420820] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.420872] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.422028] input: *** Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:195D:1017.0002/input/input5
[    1.422337] ata4.00: Enabling discard_zeroes_data
[    1.459789]  sdb: sdb1
[    1.464049]  sdc: sdc1 sdc2 sdc3
[    1.464168]  sda: sda1 sda2 sda3
[    1.464322] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.464331] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.464537] ata4.00: Enabling discard_zeroes_data
[    1.481952] hid-generic 0003:195D:1017.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [***] on usb-0000:00:14.0-5/input1
[    1.482429] hid-generic 0003:195D:1017.0003: hiddev1,hidraw2: USB HID v1.11 Device [***] on usb-0000:00:14.0-5/input2
[    1.485862] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.485956] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.495556] usb 1-6: New USB device found, idVendor=195d, idProduct=2062, bcdDevice= 1.05
[    1.495568] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.495574] usb 1-6: Product: ***
[    1.495579] usb 1-6: Manufacturer: ***
[    1.498047] input: *** as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:195D:2062.0004/input/input7
[    1.499260] sd 3:0:0:0: [sdc] supports TCG Opal
[    1.499268] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.502419] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.507637]  sdd: sdd1
[    1.533996] sd 4:0:0:0: [sdd] Attached SCSI disk
[    1.561787] hid-generic 0003:195D:2062.0004: input,hidraw3: USB HID v1.11 Keyboard [*** keyboard] on usb-0000:00:14.0-6/input0
[    1.564895] input: *** as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:195D:2062.0005/input/input8
[    1.621430] input: *** Wireless Radio Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:195D:2062.0005/input/input9
[    1.621502] input: ***as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:195D:2062.0005/input/input10
[    1.621908] hid-generic 0003:195D:2062.0005: input,hiddev2,hidraw4: USB HID v1.11 Keyboard [*** keyboard] on usb-0000:00:14.0-6/input1
[    1.749331] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[    1.900667] usb 1-7: New USB device found, idVendor=13fe, idProduct=4223, bcdDevice= 1.00
[    1.900679] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.900684] usb 1-7: Product: USB DISK Pro
[    1.900688] usb 1-7: Manufacturer:         
[    1.900692] usb 1-7: SerialNumber: 070749A040443577
[    1.906603] usb-storage 1-7:1.0: USB Mass Storage device detected
[    1.907210] scsi host6: usb-storage 1-7:1.0
[    1.907402] usbcore: registered new interface driver usb-storage
[    1.909005] usbcore: registered new interface driver uas
[    2.539275] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    2.576523] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    2.643456] systemd[1]: Inserted module 'autofs4'
[    2.738904] systemd[1]: systemd 250.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    2.761440] systemd[1]: Detected architecture x86-64.
[    2.761668] systemd[1]: Hostname set to <PC>.
[    2.914042] scsi 6:0:0:0: Direct-Access              USB DISK Pro     PMAP PQ: 0 ANSI: 6
[    2.914806] sd 6:0:0:0: [sde] 31309824 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    2.915430] sd 6:0:0:0: [sde] Write Protect is off
[    2.915432] sd 6:0:0:0: [sde] Mode Sense: 23 00 00 00
[    2.916048] sd 6:0:0:0: [sde] No Caching mode page found
[    2.916050] sd 6:0:0:0: [sde] Assuming drive cache: write through
[    2.918908]  sde: sde1 sde2
[    2.920925] sd 6:0:0:0: [sde] Attached SCSI removable disk
[    2.920927] systemd[1]: Queued start job for default target Graphical Interface.
[    2.921894] systemd[1]: Created slice Slice /system/getty.
[    2.922088] systemd[1]: Created slice Slice /system/modprobe.
[    2.922276] systemd[1]: Created slice Slice /system/systemd-fsck.
[    2.922400] systemd[1]: Created slice User and Session Slice.
[    2.922438] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.922526] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.922558] systemd[1]: Reached target Local Integrity Protected Volumes.
[    2.922586] systemd[1]: Reached target Slice Units.
[    2.922598] systemd[1]: Reached target TLS tunnels for network services - per-config-file target.
[    2.922606] systemd[1]: Reached target Swaps.
[    2.922616] systemd[1]: Reached target Local Verity Protected Volumes.
[    2.922683] systemd[1]: Listening on Syslog Socket.
[    2.923268] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.923303] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.923398] systemd[1]: Listening on Journal Audit Socket.
[    2.923454] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.923519] systemd[1]: Listening on Journal Socket.
[    2.923599] systemd[1]: Listening on udev Control Socket.
[    2.923667] systemd[1]: Listening on udev Kernel Socket.
[    2.924059] systemd[1]: Mounting Huge Pages File System...
[    2.924475] systemd[1]: Mounting POSIX Message Queue File System...
[    2.924890] systemd[1]: Mounting Kernel Debug File System...
[    2.925302] systemd[1]: Mounting Kernel Trace File System...
[    2.925338] systemd[1]: Kernel Module supporting RPCSEC_GSS was skipped because of a failed condition check (ConditionPathExists=/etc/krb5.keytab).
[    2.925795] systemd[1]: Starting Set the console keyboard layout...
[    2.926246] systemd[1]: Starting Create List of Static Device Nodes...
[    2.926691] systemd[1]: Starting Load Kernel Module configfs...
[    2.927125] systemd[1]: Starting Load Kernel Module drm...
[    2.927562] systemd[1]: Starting Load Kernel Module fuse...
[    2.927626] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[    2.928567] systemd[1]: Starting Journal Service...
[    2.929556] systemd[1]: Starting Load Kernel Modules...
[    2.929942] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.929980] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[    2.930358] systemd[1]: Starting Coldplug All udev Devices...
[    2.931081] systemd[1]: Mounted Huge Pages File System.
[    2.931144] systemd[1]: Mounted POSIX Message Queue File System.
[    2.931218] systemd[1]: Mounted Kernel Debug File System.
[    2.931293] systemd[1]: Mounted Kernel Trace File System.
[    2.931363] fuse: init (API version 7.35)
[    2.931434] systemd[1]: Finished Set the console keyboard layout.
[    2.931586] systemd[1]: Finished Create List of Static Device Nodes.
[    2.931715] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    2.931775] systemd[1]: Finished Load Kernel Module configfs.
[    2.931893] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    2.931950] systemd[1]: Finished Load Kernel Module drm.
[    2.932066] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    2.932122] systemd[1]: Finished Load Kernel Module fuse.
[    2.932563] systemd[1]: Mounting FUSE Control File System...
[    2.932946] systemd[1]: Mounting Kernel Configuration File System...
[    2.933227] systemd[1]: Finished Load Kernel Modules.
[    2.933660] systemd[1]: Starting Apply Kernel Variables...
[    2.934422] systemd[1]: Mounted FUSE Control File System.
[    2.934483] systemd[1]: Mounted Kernel Configuration File System.
[    2.934729] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    2.935110] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.935176] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[    2.935607] systemd[1]: Starting Load/Save Random Seed...
[    2.935996] systemd[1]: Starting Create System Users...
[    2.939224] systemd[1]: Finished Apply Kernel Variables.
[    2.944252] systemd[1]: Finished Load/Save Random Seed.
[    2.944331] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
[    2.951644] systemd[1]: Finished Create System Users.
[    2.952107] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.958299] systemd[1]: Started Journal Service.
[    2.961909] systemd-journald[376]: Received client request to flush runtime journal.
[    2.963416] systemd-journald[376]: File /var/log/journal/dace1d44c8cd4b01946540ac2ed2918b/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    3.044659] intel_pmc_core INT33A1:00:  initialized
[    3.066229] EDAC ie31200: No ECC support
[    3.066258] EDAC ie31200: No ECC support
[    3.068856] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.068876] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    3.068911] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    3.068922] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.068940] sr 5:0:0:0: Attached scsi generic sg4 type 5
[    3.068954] sd 6:0:0:0: Attached scsi generic sg5 type 0
[    3.070791] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.071235] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    3.094429] iTCO_vendor_support: vendor-support=0
[    3.113470] pstore: Using crash dump compression: deflate
[    3.113476] pstore: Registered efi as persistent store backend
[    3.166673] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    3.169742] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    3.171501] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.176358] asus_wmi: ASUS WMI generic driver loaded
[    3.179604] asus_wmi: Initialization: 0x0
[    3.179665] asus_wmi: BIOS WMI version: 0.9
[    3.179880] asus_wmi: SFUN value: 0x0
[    3.179885] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[    3.180099] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.180105] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.180108] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.180109] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.180111] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.180867] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
[    3.263853] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.264093] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.358883] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    3.362796] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.362800] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.362807] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.362808] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.362809] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    3.362811] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.362812] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    3.362813] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    3.362814] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    3.427809] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.430683] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    3.430792] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    3.432239] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    3.432331] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    3.432395] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    3.432517] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    3.432662] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    3.437886] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    3.438096] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    3.493336] intel_rapl_common: Found RAPL domain package
[    3.493340] intel_rapl_common: Found RAPL domain core
[    3.493342] intel_rapl_common: Found RAPL domain uncore
[    3.493343] intel_rapl_common: Found RAPL domain dram
[    4.034369] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.182235] NET: Registered PF_QIPCRTR protocol family
[    4.183726] RPC: Registered named UNIX socket transport module.
[    4.183728] RPC: Registered udp transport module.
[    4.183728] RPC: Registered tcp transport module.
[    4.183728] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.973027] e1000e 0000:00:1f.6 eth0: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[    5.973030] e1000e 0000:00:1f.6 eth0: 10/100 speed: disabling TSO
[    5.973079] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.002372] vboxdrv: loading out-of-tree module taints kernel.
[    6.004764] vboxdrv: Found * processor cores
[    6.021876] vboxdrv: TSC mode is Invariant, tentative frequency 2999990835 Hz
[    6.021885] vboxdrv: Successfully loaded version 6.1.34_Debian r150636 (interface 0x00320000)
[    6.039973] VBoxNetFlt: Successfully started.
[    6.056521] VBoxNetAdp: Successfully started.
 

kimarite képe

Kérdések

Értékelés: 

0
Még nincs értékelve
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.

A Tomoyo-t te telepítetted?
Mi az sdc (fájlrendszer, mi van rajta, stb.)?

Rendszered pontosan (kimenet)?

inxi -Fzxxx

A parancssor kimenetét az aláírásomban szereplő paste.ee-s módszer szerint közöld.

Live rendszer alatt még nem

Értékelés: 

0
Még nincs értékelve

Live rendszer alatt még nem próbáltam ellentétben olyan viszont volt hogy telepítés közben indult újra és kezdhettem elölről a telepítést. Pontosabban nem is újraindulás. Inkább úgy viselkedik a gép mintha a reset gombot megnyomnám rajta.

A syslog-ban szerintem ez a rész ami érdekes lehet csak nem tudom mit lehet vele csinálni és máshol sem találtam megoldást a problémára azért próbálkozom itt.

[    2.963416] systemd-journald[376]: File /var/log/journal/dace1d44c8cd4b01946540ac2ed2918b/system.journal corrupted or uncleanly shut down, renaming and replacing.

Nem telepítettem a Tomoyo-t és ahogy nézem a rendszerrel sem érkezett, mert nem lelem annak nyomát hogy telepítve lenne. A paste.ee-ről törölni is lehet feltöltött dokumentumokat?

kimarite képe

GRUB menü

Értékelés: 

0
Még nincs értékelve

#2 Az Advanced options almenüre kell lépni (GRUB menü), és ott vannak a régebbi kernelek indítási lehetőségei (kiválasztás, és Enter):

kimarite képe

Live rendszer alatt még nem Live rendszer alatt még nem

Értékelés: 

0
Még nincs értékelve

#3 A hibaüzenet „bármi”lehet. „Akár” ez is:
https://bbs.archlinux.org/viewtopic.php?id=151341

De még nem tudjuk a rendszered, a particionálást, lényegében semmit... (inxi -Fzxxx kimenet), ahhoz, hogy pontos választ tudjunk adni. Nemcsak kérdezni kell, hanem válaszolni is. :)

Nem telepítettem a Tomoyo-t és ahogy nézem a rendszerrel sem érkezett, mert nem lelem annak nyomát hogy telepítve lenne.

Értem. Még egy kimenet kell:

apt-cache policy tomoyo-tools libtomoyotools3

És ez is (a pótlás):

inxi -Fzxxx

A paste.ee-ről törölni is lehet feltöltött dokumentumokat?

Nem szokás törölni, mondhatni, a törlés vagy bármilyen lejárat megadás gorombaság számba menő illetlenség. Mivel, a cél az, hogy a hibaüzeneteket és a megoldást hasznosíthassa más felhasználó is a jövőben, azaz, megmaradjanak az utókornak. Nem töltesz fel dokumentumot, a kimenet szöveges tartalmát töltöd fel, és nem fájlt. Olvasd el a leírást az aláírásomban.

95% valami hardver gond

Értékelés: 

0
Még nincs értékelve

Több információ kellene, de nagy vonalakban közelítve  a tápegység felé kellene tekinteni.

Aztán alaplap. Milyen tápegység van a gépben? A jófajták pl. lekapcsolnak / újraindulnak zárlat esetén, pl. a gépben elkallódott csavar esetén, ill. láttam már olyant is, hogy lemez éléhez nyomódott kábel szigetelését a lemez átvágta, és bizonytalan kontakt keletkezett, néha zárt a kábel a ház földelt fémrészével, néha nem.

Van az UEFI BIOS-nak memtest funkciója? Ha igen, futtatni kellene. Ha nincs, ezt letölteni:

https://www.memtest86.com/downloads/memtest86-usb.zip -ebben az img fájlt felírni pendrájvra, arról indítani a gépet. Ha hibára fut, akkor lehet memória hibára gyanakodni, ha újraindul, akkor lehet proci hiba is.

 

kimarite képe

Live rendszer alatt még nem Live rendszer alatt még nem

Értékelés: 

0
Még nincs értékelve

#3.1 Ui.: az sdc mibenlétét azért kérdeztem, mert lehet hardveres gond is. Ami nemrég említve lett, hogy a táp nem bír el egy külső SSD-t vagy HDD-t. Más hardveres gond is lehet..., szóval, a probléma oka nemcsak szoftveres lehet. Általában először a hardveres problémáknak érdemes utánajárni.

Live rendszer alatt még nem Live rendszer alatt még nem

Értékelés: 

0
Még nincs értékelve

#3.1.1 Van abban egy rakat lemez, sde is van. Lehet az is, hogy gyenge a táp. Vagy a konnektor.  Ja, jut eszembe, a legutolsó ilyen kalandomnál a hosszabbító volt a ludas a melóban. Át kellett dugni a PC-t másik hosszabbítóba, mindjárt nem indult újra.

De érdemes a fali konnektort is leszerelni, belenézni. Mostani hétvégén villanyszerelek, hasonló soklemezes monstrum PC konnektora, hát hogy is mondjam, 1,2 mm alu kábel volt, és az egyik vezeték annyira forrósodott, hogy szarrá olvasztotta a csokit, nem volt zárlat, és az a PC nem is indult újra, ment rendesen, csak említették, hogy pár éve azt a konnektort cserélni kellett, mert a régi füstölt. What the fuck, mondtam, és benéztem a konnektor mögé, akkor láttam, mi van.... mostan már 2,5 Cu vezeték van, az már baba, de még van egy csomó további alu vezeték amit cserélni kell, a többi konnektorok is legyenek rendben, ez van folyamatban.

De a lényeg, nem nagyon van olyan, én nem tudok olyant, ami miatt a Linux újraindítaná a gépet, mint ahogy a Windows teszi. Jellemzően ha lefagy, behal, akkor csak simán úgy marad, hogy képernyőn olvashatni lehessen, mi van.  Ott valami hardver gond van. Áram gond.

Live rendszer alatt még nem

Értékelés: 

0
Még nincs értékelve

#3 "/system.journal corrupted"

Ez mar a varatlan ujrainditas(oknak) lehet a kovetkezmenye.
A Telepites kozbeni ujraindulas is hardware hibara utal. (tap, alaplap, RAM ?)

Szerintem, szakemberrel kene megvizsgaltatni A-tol Z-ig a gepet.

kimarite képe

Live rendszer alatt még nem (on/off)

Értékelés: 

0
Még nincs értékelve

#3.1.1.1 on | ki is kéne takarítani a számítógépet, lehet poros, szutykos, stb..

#3.1.1.1 off | A 2.5 mm2-es MCU (réz) az tényleg visz mindent, ha háztartásról van szó. Mert a 1.5 mm2-es az már 16 A-el terhelhető (legfeljebb). https://www.novill.hu/magazin-fooldal/567-vezetekek-terhelhetosege-meretezese

Mondjuk, az is igaz, hogy nagyobb fogyasztó is van, például bojler. Ha 10 A-t nézünk, akkor 10 Ax230 V az 2.300 W. De ezt csak magamnak írom, mert nálam is kialakítás alatt van néhol a vezetékelés. A 2.5 mm2-es vezeték manapság 15.000 Ft/100m és ugye három kell. 1.5 mm2-esből van 3x100 m. És a biztosítékok mindegyike 10 A-es. :)

Van egy 2.4 kW-os ventilátoros hősugárzóm, ha ez megy és mellette a mosógép is, akkor kakukk: mert egy körön vannak jelenleg.